Bricky is suitable for standard brick and block on edge construction. Bricky is a simple but highly effective tool that acts as a template to ensure a perfectly uniform bed of mortar is laid between courses of bricks and blocks. Soon no wall in the world will be built without it.

US:
Brick: 190mm x 90mm x 57mm (7 5/8" x 3 5/8" x 2 1/4")

Block: 390mm x 190mm x 90mm (15 1/2" x 7 1/2 " x 3 5/8 ")

EUROPEAN:
Brick: 215mm x 102.5mm x 65mm (8 5/8" x 4" x 2 5/8")

Block: 440mm x 215mm x 100mm (17 1/2 " x 8 1/2 " x 4 ")

Note: Current models are suitable for standard European and US block and brick dimensions

Masons using Bricky - the benefits

• Increases productivity - up to 300%
• Eliminates mortar waste - traditionally 40% was wasted
• Creates no mess - no mortar falls into cavities
• Ensures precise joint spacing - standard 10mm (3/8")
• Automatically points joints to perfection - 6mm recess
• Assures joints are completely filled with mortar - no gaps
• Requires no follow-up raking out, acid cleaning etc.

The Bricky is made from injection moulded plastic (ABS) making it extremely durable, rigid and resistant to the elements, as well as lightweight and easy to use. Wall building requires both horizontal and vertical joints between every brick and block. The Bricky tool caters for both joints. It comprises of two components: a horizontal guide and a vertical guide.

Horizontal Guide

As bricks and blocks on edge are manufactured to a standard width, the horizontal guide is suited to both brick and block on edge construction.

Features include:

• Level vials on both horizontal planes.
• A 900mm long template to receive a 12m thick layer of mortar. This thickness was specifically calculated to cater for 2mm natural compaction and ensure that the standard 10mm (3/8") joint is achieved and securely bonded.
• The back end is open to allow the tool to slide along the wall as work progresses.
• Four spring-guides to ensure that the tool is always centred on the wall. The rounded edges on these springs allow the user to guide the tool along the wall. Protective cases are specifically located so the mortar bed will meet precisely at the corners.

Vertical Guides

Two vertical guides are provided to cater for vertical joints in brick and standard block on edge.

Features include:

• A template to receive an 11.5mm vertical bed of mortar. This thickness was specifically calculated to cater for 1.5mm natural compaction and ensure that the standard 10mm finished joint is achieved and securely bonded.
• The vertical guide is designed to ensure that the user can quickly plaster in the vertical joint. The positioning guides are rounded at the ends to allow placement with speed and ease.
• The Bricky tool also features an ergonomically designed handle for user comfort.